Dahua technology co., ltd Camera module VTO4202F-P

Features:

• Anodized front aluminum panel; IK07
• Supports voice and video communication
• 2 MP high definition fisheye camera with 160° view range
• Access control function; controls two locks
• Surface mount and flush mount
• IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)

Technical Specifications:

System
• Main Processor SoC processor
• Operating System Embedded Linux operation system
• Network Protocol IPv4, RTSP, RTP, TCP, UDP, SIP, P2P
Basic
• Camera CMOS Low illumination 2MP HD colorful 160° fisheye camera
• Angle of View H:160°, V:82°, D:180°
• Focal Length 1.95 mm
• WDR
• Noise Reduction Noise suppression and echo cancellation
• Video Encoding H.264
• Frame Rate PAL: 25 fps; NTSC: 30 fps
• Video Bit Rate 256K to 2M
• Light Compensation IR light
• Day/Night Switch Yes
• Audio Encoding PCM G.711 A G.711 U
• Audio Input Built-in omnidirectional microphone
• Audio Output Built-in loudspeaker
• Audio Bit Rate 16Khz 16bit
Function
• Communication Methods: Digital communication
• Unlock Mode Remote unlocking
• Auto Snapshot Yes
• Leave Videos or Text
• Messages Yes
• Web Configuration Yes
Performance
• Housing Material Aluminum
Port
• RS-485 Port 1 RS-485 half-duplex port
• Alarm Output Port 1
• Power Output Port 1-ch 12 VDC output 100mA
• Unlock Button Exit button for opening the door
• Door Status Detection Detects door magnetic status
• Door Lock Control NC/COM/NO
• Ethernet Port 10/100 Mbps self-adaptive Ethernet/2-wire
Alarm
• Tamper Alarm Tamper alarm
Regular
• Ingress Protection
• IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)
• Appearance Color Silver
• Housing Material Aluminum
• Power Supply Mode 12 VDC/PoE
• Installation Method Surface mount and flush mount
• Accessory Mounting box
• Dimensions 100mmЧ100mmЧ49.30mm (3.94"Ч3.94"Ч1.94")
Protection Grade
• IK07, IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)
• Working Temperature -20°C to +60°C (-4°F to +140°F )
• Working Humidity 10%RH–90%RH
• Power Consumption ?12W
• Net Weight 0.35kg (0.77 lb)
• Gross Weight 0.4kg (0.88 lb)